Wireless charging option
Model C2 Large
Built forTransporting larger bins, supplies, and oversized components
View Model C2 LargeNewModel C2 Option
Wireless Docking & Charging for Model C2 AMRs Autonomous Delivery. Automatic Charging.
Keep materials moving with fewer interruptions. The new Quasi Robotics Wireless Docking & Charging Station lets compatible Model C2 robots automatically dock and recharge—when battery levels require it, according to a charging schedule, or on command from your fleet management system.
Powered by WiBotic’s proven 300W wireless charging technology and integrated with Model C2 autonomy, it brings hands-free charging to your material transport workflow.
- Up to 300WWireless charging power
- ContactlessNo exposed charging contacts
- 3 ways to chargeBattery level, schedule, or fleet command
- 3 Model C2 platformsLarge, PartPorter & Heavy
Let Your Robots Take Care of Charging
Your team has work to do. Plugging in robots shouldn’t be part of it.
-
Hands-Free
Model C2 docks and charges itself. No one stops work to plug it in.
-
Nothing to Wear Out
No exposed charging contacts to clean, corrode, or replace.
-
Charges on Your Terms
When the battery runs low, on a schedule, or on a fleet command.
The StationQuasi + WiBotic
Meet the Model C2 Wireless Charging Station
A dedicated charging destination. Seamlessly integrated with your Model C2.
The Quasi Robotics station combines a purpose-built docking structure with WiBotic wireless power hardware. A transmitter at the station transfers energy to a receiver installed on the robot, while an onboard charger manages delivery of that energy to the battery.
WiBotic’s adaptive power transfer technology accommodates variation in coil positioning, supporting reliable charging without requiring physical electrical contact.
- Charging power
- Up to 300W
- Power transfer
- Contactless, paired transmit and receive coils
- AC supply
- 100–230V AC, 50–60Hz
- Charging activation
- Battery level, schedule, or fleet command
How Power Reaches the Battery
Energy moves from facility AC power to the Model C2 battery without any physical electrical contact between the station and the robot.
At the station
- Facility AC power
- Transmitter
- Transmit coil
Wireless transfer
6.78MHz nominal
6.78MHz nominal
On the Model C2
- Receiver coil
- Onboard charger
- Battery
How It WorksFour Steps
Dock. Charge. Get Back to Work.
-
Charging Is Requested
A battery threshold, configured schedule, or fleet management command sends Model C2 to its charging station.
-
Model C2 Docks Automatically
The robot navigates to the station and positions its onboard receiver within charging range.
-
Wireless Charging Begins
The station and onboard charger communicate to establish power transfer. The charger regulates battery voltage and current throughout the charging cycle.
-
Model C2 Returns to Service
When the configured charging conditions are met, Model C2 is ready for its next assignment.
CompatibilityModel C2 Line-Up
Available for Three Model C2 Platforms
Bring automatic wireless charging to the Model C2 that fits your material handling needs.
Wireless charging option
Wireless charging option
Wireless charging option
Wireless charging is an optional configuration for Model C2 Large, PartPorter, and Heavy. It is not available for Model C2 Mini or Standard.
Find Your Model C2SafetyCompliance
Safety and Regulatory Compliance
WiBotic’s TR-302 transmitter documentation identifies the following safety and electromagnetic compatibility standards.
| Area | Documented standards and regulatory references |
|---|---|
| Product safety | IEC 62368-1 |
| United States | FCC Part 18, Part 15.249, and Part 15C |
| European EMC and radio requirements | EN 55011, EN 300 328, EN 301 489, and EN 61000 series |
| Human exposure to electromagnetic fields | EN 62311 |
| Additional market approvals | Canada, Japan |
Need documentation for your facility review? Contact Quasi Robotics for applicable supplier certificates, regulatory records, and installation requirements.
Request DocumentationThe references above describe WiBotic components and supported configurations. Applicable certifications depend on the exact hardware configuration and destination market. Component approvals do not independently establish certification of the complete Quasi Robotics docking station.
SpecificationsStation & Components
Technical Specifications
| Specification | Details |
|---|---|
| Charging | |
| Wireless charging power | Up to 300W |
| Compatible robots | Model C2 Large, PartPorter, and Heavy with the wireless charging option |
| Charging activation | Automatic battery-based charging, configured schedules, or fleet management command |
| Power transfer | Contactless wireless transfer using paired transmit and receive coils |
| Wireless power frequency | Nominal 6.78MHz |
| Electrical | |
| AC supply | 100–230V AC, 50–60Hz |
| Component protection rating | IP20 for standard transmitter and onboard charger enclosures; intended for indoor use |
| Station | |
| Station dimensions (W × D × H) | 580 × 430 × 550 mm (22.8 × 16.9 × 21.7 in) |
| Station weight | 3.5 kg (7.7 lb) |
| Recommended installation clearance | 3 m (9.8 ft) |
300W and 30A are hardware maximum ratings. Actual battery charging power and current depend on battery voltage, charge level, configuration, alignment, and operating conditions. Full charging time varies by Model C2 configuration and battery condition.
OperationsCharging, Planned
Automate the Next Part of Your Workflow
You’ve automated material delivery. Now make charging part of the same process.
Wireless docking and charging helps reduce routine operator involvement and makes charging easier to plan around production. Whether you run one Model C2 or coordinate several robots, it gives your team a practical way to manage energy alongside delivery demand.
Between Assignments
Replenish battery energy during available time between transport tasks.
Around Your Shifts
Schedule charging during breaks, quieter periods, or overnight.
Across Your Fleet
Use fleet management commands to coordinate charging with robot availability and operational priorities.
Less time managing charging. More attention on the work that matters.
FAQWireless Charging
Frequently Asked Questions
Have a question about your facility, fleet, or existing robots that isn’t covered here?
Talk to a specialistDoes anyone need to plug in the robot?
No. Once the station and compatible robot are configured, Model C2 docks and charges automatically. The station itself connects to facility AC power.
Does the robot need to touch electrical charging contacts?
No. Energy transfers wirelessly between the station’s transmit coil and the robot’s receiver coil.
Can we schedule charging?
Yes. Model C2 can charge according to configured schedules, when battery levels require it, or in response to fleet management commands.
Is wireless charging available for every Model C2?
The option is available for Model C2 Large, PartPorter, and Heavy. It is not available for Mini or Standard.
Can an existing Model C2 be upgraded?
Contact Quasi Robotics with your robot’s model and serial number so we can confirm upgrade compatibility and requirements.
Ready to make charging automatic?
Book a demo and see wireless docking and charging with your Model C2.