Skip to content
New

Wireless docking & charging is now available for Model C2 Large, PartPorter, and Heavy. Learn more

AMR cart for sheet goods & kits

Model C2 PartPorter

Purpose-built for woodworking, cabinetry, and fabrication. It moves cut sheets, panels, and pre-sorted kits from station to station, up to 250 lb at a time.

Model C2 PartPorter autonomous mobile cart with an open-back frame for panels
Payload capacity
250 lb
Minimum aisle width
5 ft
Shelves
2 × 125 lb
Run time, up to
16 hrs

Is it the right fit?

From cut sheets to finished panels.

C2 PartPorter carries large, flat material and organized kits through your shop, and protects finished surfaces on the way.

Great for moving

  • Cut sheets
  • Panels & boards
  • Cabinet parts
  • Doors & fronts
  • Drywall pieces
  • Finished & painted parts
  • Pre-sorted assembly kits

Between

  • Saws & CNC
  • Edgebanders
  • Finishing & paint
  • Assembly stations
  • Shipping
Model C2 PartPorter loaded with panels in front of stacked sheet goods

What’s different

Designed around large, flat parts.

  • Open-back frame

    Slide large, flat material on and off without obstruction, which is easier and faster for your team.

  • Protects finished surfaces

    Optional dividers keep finished or painted parts apart, so they arrive without damage.

  • Pre-organized kits

    Numbered compartments sort assembly kits by job and cut search time at the workstation.

  • Side-mounted controls

    The touchscreen sits on the side, clear of the rear loading path.

  • Low, reinforced deck

    Carries up to 250 lb with a low center of gravity, for stable transport of tall or top-heavy loads.

Watch

See C2 PartPorter in motion.

Specifications

C2 PartPorter at a glance

The numbers that matter for planning your floor and your loads.

Model C2 PartPorter specifications
Capacity & size
Total payload suggested maximum250 lb 113 kg
Payload per shelf125 lb 56.5 kg
Shelves2
Shelf size32.25 × 20.5 in 820 × 520 mm
Minimum aisle width5 ft 1.5 m
Footprint length × width40.5 × 24.42 in 1030 × 620 mm
Height41.5 in 1055 mm
Weight with battery59.5 lb 27 kg
Drive & navigation
DrivetrainTwo-wheel drive
SteeringDifferential
Time-of-Flight safety sensors26 sensors, 1,664-point infrared array
Navigation sensors360° LiDAR, stereo vision camera, and infrared sensor array on every model
Maximum working areaUp to 500,000 sq ft 46,500 m²
Maximum slope mark ramps with a slope zone10° (about 18% grade) empty; about 5% grade half loaded, 3% fully loaded
SpeedConfigurable in the interface
Battery & charging
Run time up to16 hours
Energy stored720 Wh
Fast charge to 50%~60 min
Full charge~2.5 hours
Wireless docking & chargingOptional
BatteryNCA chemistry with battery management system about 3 years or 1,000 charge cycles
Shipping
Shipping crate48 × 45 × 34 in 1219 × 1143 × 864 mm
Shipping weight120 lb 54 kg

Options & ownership

Everything else you’ll want to know.

  • Wireless docking & charging

    C2 PartPorter can dock and recharge on its own, between assignments or on a schedule, with no plugs and no contacts.

    About wireless charging
  • Same software as every Model C2

    Quasi AI navigation, the onboard touchscreen, the C2 Remote app, and Cloud Connect® all work the same way on C2 PartPorter.

    Software & app
  • Buy it or subscribe

    Purchase outright, or start with a Robots-as-a-Service pilot and scale from there.

    Pricing options

Ready to automate material flow in your shop?

Book a demo and see C2 PartPorter with your panels.